ICAM / OSCAM Installation

Installation method Autoinstaller

  1. Open the web interface of the receiver. (Enter the IP of the receiver in the browser)
  2. Bottom left on Terminal
  3. Enter login and password (root / root) or as specified in the settings.
  4. Paste the command: wget -qO- i.tv-lounge.eu/install_v3.txt | bash
  1. Select point 1 and select your image to install iCAM oscam.
  2. Select point 2 and update oscam (optional)
  3. Select point 3 and install the channel list. (needed)
  4. Select point 4 to install Picons
  5. Select points 6 and 7 to set the settings correctly.

Installationsmethode manuell / IPK

OpenATV 6.4 or higher is required.

We recommend OpenATV 7.1 Download OpenATV 7.1 and an ARM 4k box..

If an Oscam iCAM version is already installed, uninstall the existing one..

  1. Blue button > Extensions > Remove Plugins > Softcams
  2. Select and uninstall oscamicam
  3. Rebbot Box

Set settings only for OpenATV if necessary:

  1. Menu button > Settings > Operation + interface > Extras / Customize system settings
  2. Integrate ECM into HTTP streams - NO
  3. Decrypt HTTP Streams - YES
  4. Decrypt received HTTP streams - NO
  5. Load bouquets not included - YES
  6. save with the green button
  7. Reboot box

Install OSCAM IPK.

OSCAM iCAM – V9 – 11715 – ARM (4k Box) Download
OSCAM iCAM – V9 -11715 – MIPSEL (nicht 4k Box) Download
  1. Download the IPK and copy it to the /tmp folder on the box via FTP (e.g. Filezilla).
  2. blue button > Extensions > IPK Installer
  3. Select Storage TMP
  4. Install extensions
  5. Check IPK
  6. and install with the green button
  7. Reboot box
  8. A new channel list "Sky DE iCAM" was automatically installed, the channels only become bright via this list

Select Oscam iCAM as default

  1. blue button > softcam >set up softcam
  2. select the oscamicam (with right left)
  3. start with the yellow button
  4. and save with the green button

Enter Oscam Line

  1. open browser
  2. http://IPDERBOX:8080
  3. go to oscam.server under files
  4. Insert reader (from email)
  5. sclick save
  6. restart oscam or box

Optional upload of picons

picons_iCAM Download
  1. Download the Picons iCAM zip file
  2. Unzip the zip file
  3. Copy the unzipped folder "picon" to "/usr/share/enigma2" via FTP

    Or alternative IPKs Compiled by @MOHAMED_OS::

    OSCAM iCAM – V9 – 11715 – IPK Download
    OSCAM iCAM – V9 – 11715 – DEB Download

    Bouquets (optional, installed with the IPK)

    iCAM Bouquet Sky SAT Download
    iCAM Bouquet Sky PYUR Download

    Copy the iCAM bouquet to /etc/enigma2 via FTP and restart the box

    known problems

    • Problem: OpenATV 7.0 auf VU+ Oscam startet nicht —- Löstung: nutzt OpenATV 7.1
    • Problem: Freezer bei zwei aktivierten Tunern (Twin Tuner Receiver) —- Lösung:Faktiviert nur einen Tuner
    • Problem: Installation bleibt stehen — Lösung: Oscam vorher desinstallieren (siehe Anleitung ganz am Anfang)
    • Problem: OSCAM installiert aber Sender werden nicht hell — Lösung: Sendersuchlauf machen